PHAESYLE26PHotography, AErial SurveY, Logging & Exploration

Revision R11 · Build B261112 · 12 November 2026

In this notice
  1. 0. Application to SPOTMAP and standalone applications
  2. 1. Important safety notice and intended use
  3. 2. AI assistance, human review and testing
  4. 3. Safe operation and independent verification
  5. 4. Data accuracy, maps and recorded locations
  6. 5. Tool-specific limitations
  7. 6. Positioning sources, RTK and simulation
  8. 7. Cameras and external equipment
  9. 8. Meshtastic messaging — stationary ground use only
  10. 9. Recording, exports and external viewers
  11. 10. Independence, third-party resources and privacy
  12. 11. Assumption of risk, warranties and liability
  13. 12. Specific disclaimer and important safety notice for standalone applications

In this notice, “SPOTMAP” means the main SPOTMAP application, the standalone applications provided as part of the SPOTMAP project, and their associated websites, web tools, help, examples and downloadable materials, unless a provision specifically concerns only one application or feature. “You” and “your” mean each person who reads, accesses, installs, operates or otherwise uses SPOTMAP or its information, including an end user, passenger, observer, copilot, pilot, driver or other operator. Describing a person's role does not authorize a use prohibited by this notice.

0. Application to SPOTMAP and standalone applications

SPOTMAP brings multiple tools together within one main application. Some tools are also available as separate standalone applications, such as Crosswind Finder. The common disclaimer and important safety notice in Sections 0–11 applies to the main SPOTMAP application and every SPOTMAP standalone application, whether used independently or together with the main application.

Using a standalone application does not remove or reduce any applicable warning, restriction, responsibility or limitation in the common notice. Provisions concerning a particular feature apply wherever that feature is provided; mentioning a feature does not mean it is included in every application.

Any additional application-specific disclaimer or important safety notice appears in Section 12. These additional notices supplement the common notice. They do not replace, override, weaken or create exceptions to it. You must comply with both the common notice and every additional notice applicable to the application you use. Any more restrictive application-specific condition applies in addition to the common requirements.

A standalone application remains subject to the common notice even if no additional notice is listed for it in Section 12.

1. Important safety notice and intended use

FOR INFORMATIONAL, EDUCATIONAL AND PERSONAL RECORDING PURPOSES ONLY. NOT FOR NAVIGATION OR SAFETY-CRITICAL USE.

The main SPOTMAP application is designed to record and display locations, tracks, observations, points of interest and related information. Its associated website, web tools, help, examples and downloadable materials serve the same informational and educational purpose.

Use at your own risk, within the limitations stated in this notice.

The limitations and examples in this notice do not identify every possible hazard or failure. Always apply sound judgment, appropriate training and conservative safety decisions. If you are uncertain whether an activity or use is safe, lawful or permitted, do not proceed until that uncertainty is resolved.

If in doubt, don't go out.

SPOTMAP and its associated materials:

  • Must not be used for primary, backup or emergency navigation, including flight under visual flight rules (VFR) or instrument flight rules (IFR), aircraft taxiing, or any navigation in the air, on land or on water, or any combination of these.
  • Must not be used for turn-by-turn directions, operational route guidance, or decisions about safe routes, altitudes, terrain clearance or water depths, in the air, on land or on water, or any combination of these.
  • Must not be used for terrain, obstacle, traffic, collision or weather avoidance in the air, on land or on water, or any combination of these.
  • Must not be used to determine compliance with airspace or water restrictions, operating limitations, road restrictions or access permissions.
  • Must not be used for aerial application, crop dusting or any other low-altitude mission.
  • Must not be used to make safety-critical decisions, provide emergency guidance, summon assistance or ensure that others can locate you in the air, on land or on water, or any combination of these.

These limitations apply to all activities and means of travel, including, but not limited to, aircraft, automobiles, motorcycles, boats, sailboats, kayaks, bicycles, scooters, horseback riding, walking, hiking and other outdoor recreation.

The words “survey,” “planner,” “finder,” “fix,” “coverage” or similar tool labels do not expand this intended use. SPOTMAP is not offered as a certified surveying instrument, an operational flight-planning system or a substitute for required navigation or emergency equipment.

A displayed route, track, marker or shaded area does not establish that a place is safe, accessible, open to the public, legally accessible or free of hazards. The absence of a displayed hazard does not mean that no hazard exists.

2. AI assistance, human review and testing

The app and website have been developed with substantial assistance from artificial intelligence (AI). Parts of the project have been generated, drafted, revised or debugged using AI, including programming and code, app and web interfaces, help and explanatory content, this disclaimer, Credits & Licenses materials, and selected illustrations and artwork.

Project design and validation are conducted under human direction, with AI assistance in development and content creation. Human review and hands-on testing, including ground testing and flight testing of selected functions and configurations, have been performed. Such testing does not cover every feature, software revision, device, integration or operating condition.

Some functions, configurations and combinations have been tested only partially or have not been tested at all. Other combinations, dependencies and failure conditions may not yet have been identified. Documentation, warnings and test records may omit relevant information. Untested or unexpected interactions may involve operating-system versions, device models, permissions, settings, simultaneous accessories, data sources, network changes, interruptions, recovery, extended recording or unusual inputs. A successful test of one component or configuration does not establish that another combination, later version or real-world situation will behave correctly. Absence of a reported problem is not evidence that a condition has been fully tested or is safe.

AI-generated and human-created work can contain errors, omissions, incorrect assumptions, hidden defects and unintended behavior. Neither the development method nor the testing performed guarantees accuracy, completeness, reliability, security, freedom from bugs or fitness for a particular use. A plausible calculation or confidently worded explanation may still be wrong.

Descriptions such as “tested,” “validated,” “accepted” or “frozen” refer to the project's documented development and review process. They do not establish independent certification, regulatory approval or suitability for safety-critical use. Distribution through a testing or application platform likewise does not establish those qualifications.

This disclosure concerns assistance during development and content creation. It does not, by itself, describe the app's runtime processing or data-sharing behavior. Consult the applicable Privacy Policy and feature documentation for information about data handling.

3. Safe operation and independent verification

You are responsible for your own use of SPOTMAP and for deciding whether and when that use is safe, lawful and permitted. This does not remove or transfer the responsibilities of the pilot in command, aircraft operator, driver, vessel operator or any other person with safety duties. Use the current official information and appropriate equipment required for your activity, including applicable charts, navigation systems, instruments, weather information, published procedures, signs and instructions from relevant authorities.

Separate operator and two-person requirement

During flight or while an aircraft, vehicle or vessel is underway, SPOTMAP is intended to be operated by a separate passenger, observer or copilot who is not controlling it. The pilot flying, driver, helmsman or other person controlling it must not operate or interact with SPOTMAP.

SPOTMAP use in these circumstances requires at least two people: one responsible for control and safe operation, and another designated to operate SPOTMAP. Do not use SPOTMAP during solo flight or while alone in charge of a moving vehicle or vessel. An autopilot, cruise-control system, automated function or background-recording mode does not replace the separate person or create an exception to this restriction.

A copilot may operate SPOTMAP only when doing so is permitted and does not interfere with required monitoring, lookout, communications, checklists or other assigned duties. The presence of a second person does not itself make app use safe or authorized. A passenger must not distract the person in control, obstruct visibility or interfere with equipment. These are SPOTMAP use restrictions; they do not alter legally required crew qualifications or staffing.

Configure devices and tools before departure in a safe, stationary setting. If you are alone, limit use to a safe, lawful stop when you have no active control or safety duties requiring your attention. During taxi, takeoff, approach, landing, emergencies and other high-workload periods, suspend nonessential SPOTMAP interaction, including by the separate app operator. Required sterile-flight-deck procedures remain controlling.

Keep the roles separate: the person controlling the aircraft, vehicle or vessel must remain focused on its safe operation; the second person handles SPOTMAP only when permitted and safe. Aircraft control, lookout, communications and required procedures always take priority. The pilot in command remains responsible for the aircraft's operation. See 14 CFR § 91.3.

Do not initiate or continue a maneuver solely to obtain an app result, complete a coverage display or satisfy a software prompt. Secure devices and accessories so that they do not obstruct views, instruments, controls or safety equipment.

Electronic devices, wireless connections and flight-deck restrictions

Do not use SPOTMAP or its connected equipment aboard an aircraft unless the applicable device use, installation, wireless functions and operating conditions are permitted by the governing rules and aircraft operator's procedures, and all required noninterference determinations and authorizations have been made. If this has not been established, do not use the equipment.

This restriction covers the tablet or phone and associated Wi-Fi, Bluetooth, cellular, GNSS, camera and radio equipment. Permission for one device or operating mode is not permission for every accessory or transmitting mode. SPOTMAP compatibility, successful pairing, ground testing or an absence of obvious interference does not establish authorization.

For applicable U.S. operations, 14 CFR § 91.21 restricts portable electronic devices on specified U.S.-registered civil aircraft, including air-carrier/operator-certificate operations and other aircraft operated under IFR, subject to its exceptions. For devices relying on a noninterference determination, that determination belongs to the aircraft operator; for operations other than those certificate-holder operations, the rule permits the pilot in command or other aircraft operator to make it. Under 14 CFR § 121.306, the applicable certificate holder makes the determination. These provisions do not amount to individual FAA approval of every consumer device, and they do not make all Wi-Fi or Bluetooth use universally unlawful.

For Part 121 flight crews, 14 CFR § 121.542 restricts distracting activities during critical phases. It also restricts personal wireless communication devices and laptops at a flight-crewmember duty station during flight time, with exceptions for the specified operational or communication purposes under FAA-approved air-carrier procedures. The two-person SPOTMAP rule does not create an exception. Do not assume that personal observation or recording with SPOTMAP qualifies for permitted flight-deck use.

Cellular restrictions also involve the FCC. 47 CFR § 22.925 prohibits airborne operation of cellular telephones subject to that rule. For SPOTMAP use, keep ordinary cellular service disabled while airborne. Enable Wi-Fi or Bluetooth only where the applicable operator permissions and device-use requirements allow the actual configuration. Check the device's actual radio settings; an airplane-mode label alone does not establish compliance. A Wi-Fi connection to an onboard network is not permission to activate an ordinary cellular connection.

Follow any stricter aircraft, operator or crew instructions. Stop using the equipment if directed or if interference is suspected. FAA guidance is available in AC 91.21-1D — Use of Portable Electronic Devices Aboard Aircraft. The separate prohibition on SPOTMAP Meshtastic use in Section 8 applies regardless of permissions for other devices.

4. Data accuracy, maps and recorded locations

The main SPOTMAP application's primary purpose is to record observations and provide simple geographic context for points of interest. It is not intended to provide a precision map or an authoritative representation of the surrounding environment. Map detail, high zoom levels, satellite imagery and precise-looking coordinates must not be interpreted as proof of accuracy or suitability for navigation.

Accuracy, completeness, timeliness, availability and reliability are not guaranteed for information displayed, calculated, recorded, imported or exported. This includes maps, imagery, coordinates, airports, runways, navaids, tracks, distances, altitude, speed, direction, wind estimates, timestamps and observations.

Information may be incorrect, incomplete, simplified, outdated, delayed or unavailable. Actual conditions may differ substantially from the display. GPS/GNSS accuracy depends on factors including signal blockage, interference, satellite geometry, environmental conditions and receiver performance. See GPS.gov — GPS Accuracy.

Some online information, including Apple map data and imagery where used by SPOTMAP, may require an active internet connection to load or refresh. Internet access can be provided through Wi-Fi or, on suitably equipped devices, cellular service where lawful and permitted; these resources are not inherently Wi-Fi-only. A local Bluetooth or camera Wi-Fi connection does not itself guarantee internet access. Availability depends on the device, settings, provider and feature. Do not assume that previously viewed or cached map content will remain available offline in SPOTMAP.

Do not enable an unauthorized Wi-Fi, Bluetooth, cellular or other radio connection in an aircraft to obtain a map, correction stream or other app resource. The device and network restrictions in Section 3 still apply. If permitted connectivity is unavailable, accept that the online feature may be unavailable. Prepare and check any supported offline resources before departure. See Apple — Connect iPad to the internet.

A recorded spot or MARK may identify the position of the recording device or connected receiver at capture time, not the precise location of the object being observed. Direction arrows, sector selections, annotations and photographs do not, by themselves, establish the object's coordinates. Imported and user-created markers are not verified locations.

Do not substitute displayed altitude, speed or direction for required aircraft or vehicle instruments. GPS-derived altitude is not interchangeable with barometric altitude, and ground speed is not airspeed. Always confirm units, coordinate format, altitude reference and true/magnetic direction conventions before interpreting or sharing results. The FAA altitude and velocity explanation provides background on these distinctions; it is not an approval of SPOTMAP.

Base maps, satellite imagery and simplified offline maps are reference backgrounds, not aeronautical charts. They may omit, simplify or misplace features. A database derived from an official source is still a dated, processed copy; its presence does not establish that current conditions or restrictions are represented.

5. Tool-specific limitations

All tools, including their standalone versions and website equivalents where provided, remain subject to the restrictions above.

Tool or display Limitation
SWATH / Coverage Mode and Swath Planner Shading and boundaries reflect recorded positions, selected widths and software assumptions. “VIEWED” does not prove that terrain or an object was actually seen, photographed, inspected or completely covered. These displays do not account for every obstruction, visibility condition, camera limitation or recording gap. They must not guide aerial application or other excluded low-altitude work.
Wind from Turn / Wind from Center Wind direction and speed are estimates affected by the maneuver, changing conditions and recorded data. A quality score is a diagnostic indicator, not a certified accuracy, guaranteed confidence level or safety margin. Results do not replace weather observations or approved operational information.
Circle-to-Fix, A→B and Point–Radial/Distance Calculated centers, bearings, distances, lines and circles are informational geometry. They are not navigation commands, obstacle-clearance assurances or approved flight procedures.
Airport Finder and airport/runway databases Search results and filters do not establish that a runway is open, available, suitable, authorized or adequate for a particular aircraft. They do not replace current charts, airport information, NOTAMs, performance calculations or required operational checks.
Crosswind and Pivotal Altitude Computer Outputs depend on supplied inputs and mathematical assumptions. They do not establish aircraft performance, a permissible crosswind, maneuver safety, terrain clearance or a legal operating altitude. A computed pivotal altitude is not a minimum safe altitude. Applicable rules remain controlling; see 14 CFR § 91.119.
Survey Notes, attachments and imported references Records may contain user mistakes, outdated material or unverified observations. They do not constitute an official inspection, a certified survey, a property-boundary determination or proof that an operational requirement has been met.

6. Positioning sources, RTK and simulation

Where supported in the installed version or a separate prototype, internal positioning, external GNSS receivers, Bluetooth links and correction services can fail, disconnect, become stale or supply inconsistent data. A connected status does not guarantee that fresh, correct information is reaching every display or record.

RTK FIX, RTK FLOAT, satellite counts, accuracy estimates and similar indicators describe reported solution conditions; they do not guarantee the accuracy of every saved point, the alignment of a map image or the location of an observed object. SPOTMAP does not guarantee centimeter-level results or certified survey accuracy. Corrections and NTRIP services depend on their providers, coverage, configuration and connectivity.

Simulation, replay and demonstration data are artificial or historical. They must not be treated as a live position, current wind or a record of a real event. Check the active source, session and data age. A successful simulation or prototype test does not establish live performance or confirm integration into another app version.

7. Cameras and external equipment

A MARK, photo command, connection indicator or successful command transmission does not guarantee that a camera captured or stored an image. Camera clocks, trigger delays, device placement and separate recordings may prevent exact time or position matching. Independently check important photographs and records.

Camera control and device compatibility do not approve any installation, external mount or use on an aircraft. The app and associated guidance do not determine airworthiness, interference compatibility or mounting compliance. Obtain the permissions and technical approvals applicable to the actual equipment and installation, and follow the manufacturer's instructions.

8. Meshtastic messaging — stationary ground use only

The SPOTMAP Meshtastic integration has not been tested in flight and will not be flight-tested or supported for airborne use. It is intended only for use on the ground in a safe, stationary setting. Do not use it in flight or while a vehicle is in use.

Disable the feature and switch off the external Meshtastic radio used with SPOTMAP before flight or vehicle operation. Do not use it for automatic position transmissions or background messaging during those prohibited periods. Taxiing is not permitted ground use. Having a passenger or copilot operate the feature does not create an exception.

The electronic-device and radio restrictions in Section 3 apply independently. Permission to use a tablet, onboard Wi-Fi or Bluetooth does not authorize a separate Meshtastic radio or override this ground-only restriction. These statements concern SPOTMAP's integration and do not make a general claim about testing or approval of all Meshtastic hardware.

Ground, office or laboratory testing, and flight testing of other SPOTMAP functions, do not validate Meshtastic flight use. No airborne operation or airborne reliability is offered by this feature.

Messages, position reports and acknowledgments may be delayed, lost or incomplete. A mesh acknowledgment does not confirm that every intended recipient received or read a message. A button or message labeled “HELP” does not establish an emergency service or guarantee assistance. Do not rely on this feature for distress signaling, rescue, operational communications or safety-critical coordination.

9. Recording, exports and external viewers

Uninterrupted operation, continuous background recording, successful reconnection, storage and export are not guaranteed. Battery depletion, overheating, device failure, positioning loss, permissions, operating-system restrictions, storage limits and software errors can interrupt operation or cause incomplete or lost records.

Do not use SPOTMAP as the sole record of a journey, flight or important event. Verify and back up information that matters to you. A displayed line between recorded points does not prove that the intervening path was continuously measured.

KML, KMZ, GPX, CSV, JSON and other supported outputs preserve different information. Export options and receiving software may handle timestamps, icons, colors, folders, geometry and metadata differently. An external viewer may omit or alter a feature even when it exists in the exported file. Check important points and records in both the source and destination; successful import alone does not establish completeness.

Offline availability is limited to the data and resources actually available on the device. Online maps, remote icons, external links and connected services may require internet access, change or become unavailable. No ongoing service or compatibility is guaranteed.

10. Independence, third-party resources and privacy

SPOTMAP is an independent project. It is not affiliated with, endorsed by or sponsored by the FAA; Apple or Apple Maps; Google, Google Maps, Google Earth or Google My Maps; Garmin; Bad Elf; SparkFun; GoPro; Insta360; Meshtastic; OpenStreetMap or its contributors; or other referenced data, correction-service, hardware, software, AI, website or resource providers.

References, citations, compatibility descriptions, links and use of third-party resources do not imply endorsement or certification. SPOTMAP does not provide official Meshtastic support or official support on behalf of other referenced providers. External services and materials remain subject to their own terms and limitations.

Third-party names, trademarks, artwork, software and data remain subject to their respective owners' rights and applicable licenses. Refer to Credits & Licenses and the applicable notices for third-party attributions and license terms. This disclaimer and the AI disclosure do not replace those notices or grant additional rights to copy or redistribute third-party material.

Tracks, coordinates, timestamps, photographs, notes and attachments may reveal sensitive information. Review their contents and sharing settings before exporting, transmitting or uploading them. This notice does not replace the applicable Privacy Policy. Consult that policy and the relevant service providers' policies for information about app, website and third-party data handling.

11. Assumption of risk, warranties and liability

You acknowledge the limitations described above and accept the risks associated with using SPOTMAP and its associated website, tools and materials within their stated informational purpose. You remain responsible for your operational decisions, attention to actual conditions, independent verification and compliance with applicable laws and procedures.

To the maximum extent permitted by applicable law, the app, website, tools, materials and data are provided “as is” and “as available,” without warranties of any kind, express or implied, including warranties of merchantability or fitness for a particular purpose.

To the maximum extent permitted by applicable law, the project's developers and distributors disclaim liability for death, personal injury, property damage, data loss or other losses arising from the use of, inability to use, or reliance on the app, website, tools, materials or data.

Nothing in this notice excludes or limits liability that cannot lawfully be excluded or limited, or waives rights that cannot lawfully be waived.

12. Specific disclaimer and important safety notice for standalone applications

The following additional notices apply to the named standalone applications. Read each applicable notice together with the common disclaimer and important safety notice in Sections 0–11. All common provisions remain applicable; the notices below add requirements and do not supersede or modify the common notice.

12.1 Crosswind Finder - standalone

REFERENCE TOOL — VERIFY WITH APPROVED OPERATIONAL DATA.

Crosswind Finder is an informational reference tool. Always independently verify the entered data and calculated results against current, approved operational data and procedures applicable to the aircraft and operation. Comply with the applicable aircraft flight manual, operating limitations, markings, placards and operator procedures; see, for applicable U.S. operations, 14 CFR § 91.9.

A calculated crosswind, headwind or tailwind component does not establish that a takeoff or landing is safe, that an aircraft or operator limit is satisfied, or that an operation is authorized. The result must not be used as the sole basis for an operational decision. The tool-specific limitations in Section 5 and all other applicable common restrictions continue to apply.

12.2 Airport Finder - standalone

FOR REFERENCE ONLY — NOT FOR NAVIGATION.

Airport Finder standalone is an informational airport-reference tool. Its search results, filters, maps, distances and bearings must not be used for navigation, operational guidance or safety-critical decisions.

Use Airport Finder standalone only on the ground in a safe, stationary setting. Do not use it in flight, during aircraft taxiing, or while a vehicle or vessel is in use. You must have no active control or safety duties requiring your attention when using it.

These restrictions are stricter than the general separate-operator provisions in Section 3. A passenger, observer or copilot, the presence of a second person, an autopilot or a background mode does not create an exception.

In addition to all common restrictions:

  • U.S. airports only. Use the app only for reference searches of airports in the United States, using a compatible U.S. airport database. Do not use it to find or assess airports outside the United States. A map display or an imported record does not expand this permitted scope or establish complete, current coverage.
  • No determination of lawful overflight. Do not use the app to decide whether you may legally fly over a location or whether a route, altitude, activity or operation is permitted. An airport result or displayed location is not an authorization, clearance or permission.
  • No airspace compliance or avoidance. Do not use the app to identify or avoid airspace, determine its boundaries, class, status or restrictions, or establish compliance with entry, clearance or operating requirements.
  • No terrain or obstacle clearance or avoidance. Do not use the app to determine safe routes or altitudes, clearance from terrain or obstacles, or whether a path is free of hazards. The absence of a displayed hazard does not establish that it is absent.
  • No weather assessment, clearance or avoidance. Do not use the app to locate, track or assess weather, determine whether a location or route is clear of weather, or decide how to avoid or circumnavigate it.

An airport or runway appearing in a result does not establish that it is open, available, suitable, authorized or adequate for the aircraft or intended operation. Independently verify relevant information using current official charts, airport information, NOTAMs, weather information and applicable aircraft performance data and procedures. The app does not replace required preflight preparation; see, for applicable U.S. operations, 14 CFR § 91.103.

The airport and runway limitations in Section 5 and all other applicable common provisions remain in force.

12.3 GPS RTK - standalone

🔴Disclaimer: GPS RTK standalone displays and records positions from an external RTK GNSS receiver or the device's available default location source. Its RTK connection, correction, map and recording functions do not establish certified accuracy or suitability for navigation, surveying or safety-critical decisions. All common provisions in Sections 0–11 remain applicable, including the separate-operator and electronic-device restrictions.

In addition to all common restrictions:

  • The selected receiver may not be the active source. Selecting RTK GNSS expresses a preference. If fresh, valid RTK-receiver measurements become unavailable, GPS RTK can automatically use fresh DEFAULT GPS positions supplied by iPadOS, including an available built-in or system-supported external receiver. It can return to RTK GNSS when usable measurements resume. A session can therefore contain different sources and solution qualities. Check the active-source indication and each record's source and quality; the app name, receiver selection or session filename does not establish that every point was recorded with RTK corrections. SIMULATION contains artificial positions and must not be interpreted as a live receiver recording.
  • Connection indicators do not establish position accuracy. Bluetooth connected, NTRIP connected, Receiving RTCM Corrections, and RTK FIX describe different conditions. Receiving correction frames does not establish that they are suitable, current, applied successfully or producing an accurate absolute position. A FIX indication is the receiver's reported solution state, not an independent accuracy or integrity check. Loss of NTRIP can leave valid receiver positions available, so recording may continue with reduced or changing quality. A green indicator does not override these limitations.
  • Correction quality depends on the reference source. GPS RTK does not independently survey or certify a caster's base station, antenna coordinates, reference frame, coordinate epoch or correction content. Base-coordinate errors can affect rover coordinates even when RTK FIX is reported. Correction age, distance from the reference station, signal obstruction, reflected signals and interference can affect results. The nearest-mountpoint list uses approximate caster-advertised coordinates; proximity and an advertised RTCM 3 format do not establish suitability. A fee flag of N is a provider advertisement, not a guarantee of continued free access, availability or permission to use the service. Independently check the selected service and its conditions.
  • GST uncertainty is an estimate, not a measured error. GST values are receiver-reported position-error statistics. The displayed horizontal RSS sigma combines the latitude and longitude standard deviations; it is not automatically a 95% confidence radius or a guaranteed error bound. HDOP and satellite count likewise do not prove accuracy. Missing GST, altitude or other metadata means unavailable, not zero error. A valid position can lack matching GST information, and a small reported uncertainty or many decimal places does not establish agreement with a surveyed point. See Trimble's GST field definitions.
  • The recorded point and height depend on the active source. With RTK GNSS active, a position relates to the receiver/antenna solution, not automatically to the iPad, vehicle center, ground contact point or object being observed. GPS RTK does not apply antenna-height, lever-arm or survey-datum/epoch corrections. MSL altitude depends on the receiver's geoid model; ellipsoid height, MSL altitude, height above ground and barometric altitude are not interchangeable. Course is track over ground and may be unstable when stationary; it is not aircraft or vehicle heading. Source fallback can change both the physical measurement location and the available metadata.
  • Smooth presentation does not create additional measurements. The moving arrow and gradual appearance of confirmed swath coverage are display effects. They must not be interpreted as new measured fixes or continuous reception through an interruption. MARK saves the latest accepted fresh raw fix from the active source, not the smoothed arrow or magenta map-center cross. Measurement, arrival and processing times are distinct; where a receiver supplies time-of-day without a date, the app must infer the date from the device clock. Keep that clock correct. Gaps, stale periods and source changes can interrupt track and coverage continuity.
  • The live test rectangle and SWATH are calculated references. DEFINE AREA places a rectangle at the current fresh position from the active live source, which may be DEFAULT GPS fallback. It does not survey a property boundary or import a legal survey. VIEWED, NOT VIEWED and coverage percentages describe geometry calculated from accepted positions and the selected width and side. They do not establish actual observation, sensor coverage or completion of a search. Stationary position scatter and changing course can produce a small covered area without meaningful forward movement.
  • RTK precision does not correct map alignment. Apple Street/Satellite imagery, U.S. BASE MAP LITE, GeoTIFF, MBTiles/PMTiles and KML references can differ in age, resolution, georeferencing and datum. The app does not establish their agreement with survey control or provide a precise datum/epoch transformation for every imported source. Apparent agreement between a track, imagery and an overlay is not proof of absolute accuracy; disagreement does not, by itself, identify which source is wrong.
  • NTRIP involves an external service and possible position disclosure. When enabled, fresh receiver GGA messages are sent to the selected caster approximately every ten seconds and disclose the receiver's position and associated fix information. When TLS is disabled, the NTRIP connection is not encrypted; credentials and transmitted position data can be exposed in transit. Review the provider's access and privacy conditions. Internet access, a connected receiver and continuing correction delivery are separate dependencies; none is guaranteed by a previously successful connection.
  • Recording and recovery require verification. Closing RTK SETUP leaves the connection running, but this is different from iPadOS background operation or a locked screen. Power loss, permissions, operating-system suspension, receiver interruptions or storage problems can interrupt recording or correction delivery. File rollover and recovery checkpoints do not guarantee a complete record or replace an external backup; a recovered live session returns paused. The map shows a limited recent history even when older records remain saved. Exports represent a saved snapshot, and another viewer may omit source, quality, timing or gap metadata. Preserve the original session export and inspect that information before drawing conclusions from the displayed track or MARKs.

Reading this notice on the website does not constitute completion of the app acknowledgment.