PHAESYLE26PHotography, AErial SurveY, Logging & Exploration

CONFIGURATION INDEX

Item Configuration
Document xwind.html
Markdown source / build xwind_R10.md / B261109
File revision / build R012 / B261109
Content revision / build R009 / B261027
Date 2026-11-09
Approved source application SPOTMAP v0.9.10r01 B261014
Standalone application CROSSWIND FINDER v0.1.4r01 B261027
Source display / package build B261014 / 2026101401
Standalone package build 2026102705
Status Prepared for project-owner review; not uploaded.

Generic information

  • The offline app help stays available even when not connected to internet.
  • The online web help requires an internet connection.
  • This is a reference tool only and not a substitute for knowledge, experience or approved operational data; always strictly use, adhere, follow and verify with approved operational data.
  • If you do not have a FULL understanding of the tool, do not use it!

How to use the help section

🔴Disclaimer: A disclaimer is a legal statement designed to limit a company's liability or specify the boundaries of a product's warranty. It informs the user about what the product or company is not responsible for, or clarifies that certain information (like third-party software updates) is outside of the company's control. Impact: Legal/Financial. It protects the organization from lawsuits and sets realistic expectations for the product's performance or usage.

⚠️Warning: A warning alerts the user to potential hazards that could result in personal injury, death, severe data loss, or permanent damage to equipment. It is the most critical type of callout and must clearly explain the hazard, the consequences of ignoring it, and how to avoid it. Impact: High. Ignoring a warning can lead to physical harm or catastrophic system failure, or both.

🔼 Note: A note provides helpful, non-critical information to the user. It emphasizes points, clarifies steps, or offers background context that is not essential to completing the main task but improves the user's understanding. Impact: Low. Ignoring a note will not cause harm, damage, or data loss.

INTRODUCTION

XWIND calculates steady headwind or tailwind and crosswind components. WIND SPEED and GUST are independent inputs from 0 to 60 kt. Enter each reported speed directly. A nonzero GUST displays its own headwind or tailwind and crosswind components.

Version note: These independent full-gust instructions apply to standalone Crosswind Finder v0.1.4r01. The validated v0.1.2r01 and currently released SPOTMAP XWIND tool use the earlier input convention. The SPOTMAP change remains pending standalone validation and a separate integrated release.

BASIC USAGE

XWIND controls labelled A through F: runway heading, wind direction, steady wind, full gust speed, crosswind threshold and reciprocal heading.
  1. Set the maximum crosswind threshold (E) (in knots, from 0 to 50 kts) using the lower of your aircraft's published maximum demonstrated crosswind component and your personal limit. Any applicable aircraft or operator limitation must also be respected.

    • 🔼 Note: This setting is retained and does not need to be entered each time.
    • ⚠️Warning: Always verify that the maximum crosswind threshold is set correctly. Crosswind values turn red when they reach or exceed this threshold.
  2. Enter the magnetic runway heading (0 to 360°) by either:

    • Typing the heading in (A); or
    • Turning the graduated inner ring (A) until the runway heading aligns with the downward-pointing index at the top.
    • 🔼 Note: Tap the reciprocal heading (F) to reverse the runway heading. Tap it again to return to the original heading.
  3. Enter the magnetic wind from direction (0 to 360°) by either:

    • Typing the direction in (B); or
    • Turning the outer ring (B) until the windsock's alignment line points to the wind from direction on the graduated inner ring.
  4. Enter the steady wind speed (0 to 60 kts) by either:

    • Typing the speed in knots in (C); or
    • Dragging the dot (C) at the end of the dashed line inward to reduce the speed or outward to increase it.
  5. Enter the full gust speed in knots in (D) (0 to 60 kts).

    • For 180/09G12, enter 9 in WIND SPEED and 12 in GUST. For 31020G35KT, enter 20 in WIND SPEED and 35 in GUST. Use the reported speeds directly; no addition or subtraction is required.
    • WIND SPEED and GUST are saved and restored independently, exactly as entered. Changing WIND SPEED does not change GUST.
    • Enter 0 if there is no gust. Both W/GUST fields then display —, without a KT unit, and the gust dots disappear. The steady-wind values and arrows remain unchanged.
    • Any nonzero GUST is calculated directly from that value. The app does not check a gust-reporting threshold or compare GUST with WIND SPEED to decide whether to display it.
    • 🔼 Note: Steady and gust crosswind thresholds are evaluated independently. The threshold applies to the crosswind component, not directly to the entered WIND SPEED or GUST.
  6. 🔼 Note: In the United States, voice broadcasts from AWOS (Automated Weather Observing System), ASOS (Automated Surface Observing System), and ATIS (Automatic Terminal Information Service) normally report wind direction relative to magnetic north. Check the reference used by your source.

  7. 🔼 Note: METARs (surface observations), TAFs (terminal aerodrome forecasts), and winds aloft forecasts report wind directions relative to true north. Use the same north reference for the runway heading and wind direction; convert true wind directions to magnetic before using them with a magnetic runway heading.

  8. 🔼 Note: To convert from true to magnetic:

    • Using the phrase "East is Least, West is Best", use the following sign convention for this formula:
    • Easterly variation is assigned a negative (−) sign in front of its magnitude.
    • Westerly variation is assigned a positive (+) sign in front of its magnitude.
    • Use this formula, where the east and west variation values are positive magnitudes in degrees:
    Magnetic=True+Variation,Variation={−Vareast,if variation is EAST,+Varwest,if variation is WEST. \begin{aligned} \mathrm{Magnetic} &= \mathrm{True} + \mathrm{Variation},\\[6pt] \mathrm{Variation} &= \begin{cases} -\mathrm{Var}_{\mathrm{east}}, & \text{if variation is EAST},\\ +\mathrm{Var}_{\mathrm{west}}, & \text{if variation is WEST}. \end{cases} \end{aligned}
  9. In summary, subtract easterly variation and add westerly variation. Keep the result within 0 to 360°.

  10. Read the results at the bottom of the app, in knots, and compare them with the arrows and dots on the diagram:

    • The steady headwind or tailwind component is represented by a green arrow. Check the HEADWIND or TAILWIND label.
    • When GUST is nonzero, its headwind or tailwind component appears under W/GUST and is represented by a solid green dot aligned with the green arrow.
    • The steady crosswind component is represented by a blue arrow. The value and arrow turn red when the maximum crosswind threshold is reached or exceeded.
    • When GUST is nonzero, its crosswind component appears under W/GUST and is represented by a solid blue dot aligned with the crosswind arrow. The peak value and dot turn red when the threshold is reached or exceeded.
    • Example: runway 160°, wind from 210° at 8G19, MAX CROSSWIND 13 kt. The steady headwind is 5.1 kt, shown by a green arrow downward from the center. The steady crosswind is 6.1 kt from the right, shown by a blue arrow leftward. The gust headwind is 12.2 kt, shown by a green dot beyond the downward arrow tip. The gust crosswind is 14.6 kt, shown by a dot beyond the leftward arrow tip that turns red, together with its W/GUST 14.6 readout, because the crosswind component exceeds 13 kt. The steady crosswind arrow and 6.1 readout remain blue.
  11. 🔼 Note: No GPS, database, or network connection is required to use XWIND.

  12. Closing this help returns to the tool. The online link does not save, send, reset, or clear your work. The app's existing background behavior still applies.

EXAMPLES

These are illustrative weather reports, not current conditions. For these calculations only, assume runway headings of 160° and 340° magnetic and zero magnetic variation. These assumptions are not verified KGKY runway data. For actual use, obtain the published runway heading and convert the METAR wind direction from true to magnetic using the applicable variation.

The weather report provides:

METAR KGKY 211953Z 12009KT 10SM CLR 27/09 A3016 RMK AO2 SLP209 T02670089

For the assumed runway 16 heading of 160°, enter a wind direction of 120°, a steady speed of 9 kts, and GUST = 0. The wind is 40° left of the runway heading: the headwind is 6.9 kts and the crosswind is 5.8 kts from the left.

The weather report provides:

METAR KGKY 211953Z 03009G18KT 9SM CLR 25/08 A3017 RMK AO2 SLP208 T02560089

For the assumed runway 34 heading of 340°, enter a wind direction of 030°, a steady speed of 9 kts, and a full GUST speed of 18 kts. No subtraction is required. The wind is 50° right of the runway heading. The steady headwind is 5.8 kts (11.6 kts with gust), and the steady crosswind is 6.9 kts from the right (13.8 kts with gust). With the crosswind threshold set to 13 kts, only the peak crosswind exceeds the threshold.

Wind-report reference: FAA AIM, Chapter 7, Section 1 explains the wind-direction references and the reported maximum gust speed.

CONVERSION TABLES

XWIND uses knots (kts). This table provides conversions to other speed units:

kts mph m/s km/h
1 1.15 0.514 1.852
2 2.30 1.029 3.704
3 3.45 1.543 5.556
4 4.60 2.058 7.408
5 5.75 2.572 9.260
6 6.90 3.087 11.112
7 8.06 3.601 12.964
8 9.21 4.116 14.816
9 10.36 4.630 16.668
10 11.51 5.144 18.520
11 12.66 5.659 20.372
12 13.81 6.173 22.224
13 14.96 6.688 24.076
14 16.11 7.202 25.928
15 17.26 7.717 27.780
20 23.02 10.289 37.040
25 28.77 12.861 46.300
30 34.52 15.433 55.560
35 40.28 18.006 64.820
40 46.03 20.578 74.080
45 51.79 23.150 83.340
50 57.54 25.722 92.600
60 69.05 30.867 111.120
70 80.55 36.011 129.640
80 92.06 41.156 148.160
90 103.57 46.300 166.680
100 115.08 51.444 185.200

Quick speed conversion matrix

From kts mph m/s km/h
1 kt 1.000 1.151 0.514 1.852
1 mph 0.869 1.000 0.447 1.609
1 m/s 1.944 2.237 1.000 3.600
1 km/h 0.540 0.621 0.278 1.000