CONFIGURATION INDEX
| Item | Configuration |
|---|---|
| Document | layers.html |
| Markdown source / build | layers_R02.md / B261109 |
| File revision / build | R003 / B261109 |
| Content revision / build | R001 / B261013 |
| Date | 2026-11-09 |
| Approved source application | SPOTMAP v0.9.9R01 FIX1 |
| Standalone application | n/a |
| Source display / package build | B261013 / 2026101303 |
| Standalone package build | n/a |
| Status | Prepared for project-owner review; not uploaded. |
Generic information
- The offline app help stays available even when not connected to internet.
- The online web help requires an internet connection.
- This is a reference tool only and not a substitute for knowledge, experience or approved operational data; always strictly use, adhere, follow and verify with approved operational data.
- If you do not have a FULL understanding of the tool, do not use it!
How to use the help section
🔴Disclaimer: A disclaimer is a legal statement designed to limit a company's liability or specify the boundaries of a product's warranty. It informs the user about what the product or company is not responsible for, or clarifies that certain information (like third-party software updates) is outside of the company's control. Impact: Legal/Financial. It protects the organization from lawsuits and sets realistic expectations for the product's performance or usage.
⚠️Warning: A warning alerts the user to potential hazards that could result in personal injury, death, severe data loss, or permanent damage to equipment. It is the most critical type of callout and must clearly explain the hazard, the consequences of ignoring it, and how to avoid it. Impact: High. Ignoring a warning can lead to physical harm or catastrophic system failure, or both.
🔼 Note: A note provides helpful, non-critical information to the user. It emphasizes points, clarifies steps, or offers background context that is not essential to completing the main task but improves the user's understanding. Impact: Low. Ignoring a note will not cause harm, damage, or data loss.
INTRODUCTION
LAYERS controls which map information is visible: background maps, recorded tracks and points, distance rings, geographic grid, and imported references. Hiding a layer changes the display without deleting its data or stopping recording.
BASIC USAGE
Open LAYERS from the main toolbar. The following controls are listed in their displayed order, from top to bottom.
1. External Map Package
- SHOW EXTERNAL OSM MAP displays or hides the imported offline map package. A package must be installed before it can display detailed map data.
- IMPORT / REPLACE opens Files. Choose an extracted
.spotmapfile, not its ZIP archive. SPOTMAP validates the selected package and copies it into its own storage. Canceling the picker keeps the current map. - RELOAD reopens the installed package. Use it to retry loading the current map.
- REMOVE asks for confirmation before removing the app's installed map copy. It does not delete the original file in Files or erase recorded GNSS data.
- The information panel identifies the package, source/build dates, record count, and current loading status. A PARTIAL detail warning means the view reached the display safety budget; zoom closer to inspect a smaller area. It does not mean your recorded track was removed.
- OKEECHOBEE, SALTON SEA, and DFW are map-inspection shortcuts. They move the displayed view to those areas without changing your GPS position.
🔼 Note: Imported .spotmap data are local. SPOTMAP does not download an external OSM package through these controls. When the external map is hidden, the built-in U.S. detail can act as the fallback if its layer is enabled.
2. Recorded Track
Turn Recorded Track on to show the magenta recorded path. Turn it off to reduce clutter while recording continues. Recorded segment breaks, including pauses and genuine GPS interruptions, remain separate; hiding the track does not join or remove them.
3. Recorded POIs
Turn Recorded POIs on to show saved marks, their symbols, captured-track arrows, and observation sectors when those data are available. Saved Circle-to-Fix centers and circles follow this visibility setting as well.
A mark without a captured course retains its location and relative direction, but cannot provide a geographically oriented course arrow or sector. Turning this layer off does not delete any marks.
4. Distance Rings
Turn Distance Rings on or off to control the master visibility of the two rings. Configure RING 1 and RING 2, their distance/time mode, values, and red opacity in SETUP. A ring also needs its individual switch enabled to be visible.
5. U.S. Base Map Lite
Turn U.S. Base Map Lite on to show the bundled U.S. reference detail, including state/county boundaries, major roads, water features, cities, and airports. Its detail varies with zoom. The global land/water background is separate, so the background can continue outside the U.S. detail coverage.
The bundled map is available offline. It is a geographic reference, not an aeronautical navigation chart.
6. Latitude / Longitude Grid
Turn Latitude / Longitude Grid on to show the light-blue grid at 1° intervals. The grid is global, works independently of the U.S. detail coverage, and rotates with Track Up.
7. Imported KML Reference Layers
- Use the main toolbar's IMPORT control to load reference data from Files.
- The IMPORTED KML REFERENCE LAYERS switch shows or hides the loaded collection. Supported line and polygon styles are retained; imported point placemarks appear as cyan squares on the main map.
- The status area identifies the loaded references. CLEAR removes the currently loaded reference collection from the map; it is different from merely hiding it. Original imported files remain in Files.
- Clearing loaded references does not erase saved SWATH progress for those area boundaries. Reimport the same qualifying boundaries to recover that progress. Use RESET COVERAGE in SWATH when you intend to clear coverage.
8. Close the card
Tap X to return to the main map. Layer settings affect presentation; START, PAUSE, and STOP remain the recording controls.
ABBREVIATION
- GNSS — Global Navigation Satellite System.
- GPS — Global Positioning System.
- KML — Keyhole Markup Language.
- OSM — OpenStreetMap.
- POI — Point of Interest.
- U.S. — United States.
DEFINITION
- Layer — A set of map information that can be shown or hidden independently.
- Map package — A local
.spotmapdatabase containing geographic reference data. - Recorded track — The position history saved during recording.
- Reference layer — Imported geographic information displayed alongside the live session.
- Track Up — A map orientation that places the current ground-track direction toward the top.
- Coverage — Ground within a qualifying area that has been swept by the configured recorded swath.
