CONFIGURATION INDEX
| Item | Configuration |
|---|---|
| Document | ctof.html |
| Markdown source / build | ctof_R02.md / B261109 |
| File revision / build | R003 / B261109 |
| Content revision / build | R001 / B261013 |
| Date | 2026-11-09 |
| Approved source application | SPOTMAP v0.9.9R01 FIX1 |
| Standalone application | n/a |
| Source display / package build | B261013 / 2026101303 |
| Standalone package build | n/a |
| Status | Prepared for project-owner review; not uploaded. |
Generic information
- The offline app help stays available even when not connected to internet.
- The online web help requires an internet connection.
- This is a reference tool only and not a substitute for knowledge, experience or approved operational data; always strictly use, adhere, follow and verify with approved operational data.
- If you do not have a FULL understanding of the tool, do not use it!
How to use the help section
🔴Disclaimer: A disclaimer is a legal statement designed to limit a company's liability or specify the boundaries of a product's warranty. It informs the user about what the product or company is not responsible for, or clarifies that certain information (like third-party software updates) is outside of the company's control. Impact: Legal/Financial. It protects the organization from lawsuits and sets realistic expectations for the product's performance or usage.
⚠️Warning: A warning alerts the user to potential hazards that could result in personal injury, death, severe data loss, or permanent damage to equipment. It is the most critical type of callout and must clearly explain the hazard, the consequences of ignoring it, and how to avoid it. Impact: High. Ignoring a warning can lead to physical harm or catastrophic system failure, or both.
🔼 Note: A note provides helpful, non-critical information to the user. It emphasizes points, clarifies steps, or offers background context that is not essential to completing the main task but improves the user's understanding. Impact: Low. Ignoring a note will not cause harm, damage, or data loss.
INTRODUCTION
Circle-to-Fix estimates the current turn center from recent GPS motion. It can save that estimated center and one full circle as a numbered POI in the recording session.
BASIC USAGE
1. Select CIRCLE-TO-FIX
Open TOOLS → CIRCLE-TO-FIX. The card shows whether the feature is on or off, its current readiness, and the number of saved turns in this session.
Tap SELECT CIRCLE-TO-FIX to enable the feature and return to the main map. The main MARK area now includes FLAG TURN beside the ordinary MARK control.
2. Wait for a usable estimate
When fresh GPS motion supports an estimate, the map shows a dashed cyan circle and center crosshair. The card can show the estimated center coordinates, radius in NM/feet, left/right turn direction, and turn rate.
The estimate comes from recent course changes and ground speed. It is an instantaneous estimate, not a fit of the entire flown orbit. A short arc may provide an estimate; a complete 360° orbit is not required merely for the display to appear.
⚠️Warning: Wind, changing turn rate, and noisy GPS can move the estimated center. The displayed center has no measured altitude or accuracy and must not be treated as a surveyed fix.
3. FLAG TURN
Start the main recording if necessary. FLAG TURN is available when recording is active, the current estimate is usable, and saving is not in an error state. If it is disabled, read the status: it may be waiting for recording, a fresh fix, a turn estimate, or resolution of a save error.
Tap FLAG TURN to save the displayed center and a complete 360° circle as one numbered POI. This records the current estimate; it does not continuously update the saved center as the aircraft continues turning. Each flag stores one full circle, even after multiple revolutions.
Saved geometry appears as a solid orange circle and crosshair. The saved-turn count increases. Ordinary MARK remains available separately for the usual direction/type observation workflow.
4. Keep or turn off the live display
Closing the tool card with X leaves Circle-to-Fix enabled. Reopen the card and tap TURN OFF when you want to stop the live feature. Previously saved centers and circles remain in the session.
Use LAYERS → Recorded POIs to show or hide the saved geometry. Hiding the layer does not erase the saved turns. SWATH can continue accumulating coverage while the main session is recording.
5. Review and export
Use the main session's review controls to inspect saved POIs. After pausing or stopping and completing the required save, use EXPORT → KML or KMZ to include the saved centers and circles. JSON retains the complete capture data.
The saved Circle-to-Fix center can also be selected as a Survey Notes reference. The note stores a snapshot of that saved center, so later estimates do not move its link.
ABBREVIATION
- GPS — Global Positioning System.
- JSON — JavaScript Object Notation.
- KML — Keyhole Markup Language.
- KMZ — A ZIP archive containing KML and any packaged resources.
- NM — Nautical Miles.
- POI — Point of Interest.
- °/s — Degrees per second.
DEFINITION
- Instantaneous turn center — A center estimated from the recent rate and direction of motion.
- Radius — Distance from the estimated center to the circle's perimeter.
- Turn rate — Rate of change of ground-track direction.
- Live preview — The current changing estimate, drawn with dashed cyan geometry.
- Saved turn — The fixed center/circle snapshot created by FLAG TURN.
- Crosshair — The symbol identifying the circle center.
