PHAESYLE26PHotography, AErial SurveY, Logging & Exploration

CONFIGURATION INDEX

Item Configuration
Document camera.html
Markdown source / build camera_R02.md / B261109
File revision / build R003 / B261109
Content revision / build R001 / B261013
Date 2026-11-09
Approved source application SPOTMAP v0.9.9R01 FIX1
Standalone application n/a
Source display / package build B261013 / 2026101303
Standalone package build n/a
Status Prepared for project-owner review; not uploaded.

Generic information

  • The offline app help stays available even when not connected to internet.
  • The online web help requires an internet connection.
  • This is a reference tool only and not a substitute for knowledge, experience or approved operational data; always strictly use, adhere, follow and verify with approved operational data.
  • If you do not have a FULL understanding of the tool, do not use it!

How to use the help section

🔴Disclaimer: A disclaimer is a legal statement designed to limit a company's liability or specify the boundaries of a product's warranty. It informs the user about what the product or company is not responsible for, or clarifies that certain information (like third-party software updates) is outside of the company's control. Impact: Legal/Financial. It protects the organization from lawsuits and sets realistic expectations for the product's performance or usage.

⚠️Warning: A warning alerts the user to potential hazards that could result in personal injury, death, severe data loss, or permanent damage to equipment. It is the most critical type of callout and must clearly explain the hazard, the consequences of ignoring it, and how to avoid it. Impact: High. Ignoring a warning can lead to physical harm or catastrophic system failure, or both.

🔼 Note: A note provides helpful, non-critical information to the user. It emphasizes points, clarifies steps, or offers background context that is not essential to completing the main task but improves the user's understanding. Impact: Low. Ignoring a note will not cause harm, damage, or data loss.

INTRODUCTION

CAMERA assigns supported cameras to aircraft locations and requests photos when you use MARK. It provides connection/readiness information, a camera-only test control, and diagnostic logs.

BASIC USAGE

1. Select locations on the aircraft diagram

Open CAMERA from the main toolbar. Tap a blue location circle to select it and open its camera card. The diagram labels positions L1–L6 on the left, R1–R6 on the right, and C1–C5 along the center. These labels identify mounting locations; they do not select a photo's field of view or automatically identify physical hardware.

Select up to four locations. Each selected location has a camera icon and a summary row. Tap either to reopen its card. To select a different location when all four are occupied, first remove one existing location assignment.

The implemented camera paths are for GoPro HERO7 Black and Insta360 ONE X2. The assignment limits are three GoPros and one Insta360, for four cameras total. Do not assume support for an unlisted model from Bluetooth discovery alone.

2. Connect one camera at a time

Turn on one intended camera and keep competing camera-control apps disconnected while assigning it. Allow SPOTMAP's Bluetooth access when prompted.

  • In the GoPro section, tap SCAN FOR CAMERAS, then choose the intended device. On the HERO7, use Preferences → Connections → Connect Device → GoPro App for pairing and accept an iPad pairing prompt if shown.
  • In the Insta360 section, power the ONE X2 with its SD card installed and recording stopped. Tap SCAN FOR CAMERAS, then choose it. GoPro setup is not required for an Insta360-only arrangement.
  • STOP SCAN or CANCEL SEARCH, when displayed, ends discovery.
  • The discovered name, signal reading, and identifier help distinguish devices. Check the assigned model and location before connecting another camera.

3. Read connection and status information

At the top of the camera card, inspect Camera, Connection, and Readiness. The current-status section includes battery, card capacity, photo count, mode/photo setting, last reply, and last test-mark result.

The summary icon colors mean:

  • Gray — no camera assigned, or the assignment is disabled.
  • Red — the assigned camera is disconnected.
  • Orange — connected but not ready, or a low-battery indication is present.
  • Green — the current status satisfies the tool's readiness checks.

Read the explanatory text as well as the color. Last-known values may remain visible after a disconnection and must not be mistaken for fresh status.

For a GoPro, Connect automatically controls automatic connection for that assignment. For an Insta360, use the displayed DISCONNECT or RECONNECT action as needed. Disconnecting and removing an assignment are different actions.

4. PREPARE PHOTO

Tap PREPARE PHOTO for each connected camera, then wait for the readiness check.

  • For a GoPro, this selects normal Photo mode, turns the photo timer off, and sets Auto Off to Never. These settings remain on the camera afterward. Other image settings, such as field of view, exposure, RAW, and SuperPhoto, stay as configured on the camera.
  • For an Insta360, it selects and checks Single Photo. Prepare once after each connection with the camera idle. The camera display can still show Video while the photo request is accepted; verify the actual result with a test and camera playback.

🔼 Note: PREPARE PHOTO configures/checks the camera; it does not take a photo.

5. Identification, reassignment, and Insta360 diagnostics

The identification section shows model, firmware, and device identity. Remove location assignment asks for confirmation, frees that location, and restores its blue circle. Other assignments are retained. Remove the current assignment before choosing a different camera for that location.

The Insta360 diagnostic controls include Select and reapply Photo setting, the Photo request profile, and a Bluetooth keepalive every 2 seconds switch. The established test combination uses Photo setting on, the ONE X2 legacy payload, and keepalive on. The playback-confirmation buttons record your observation of the latest test; they do not themselves trigger a photo.

Tap Done to return to the aircraft overview.

6. GPS details for TEST MARK

This switch includes SPOTMAP's existing GPS details in camera-test diagnostics. It does not start another location provider, change recording, or alter real MARK snapshots. Camera requests do not require a usable GPS fix or a saved POI.

7. TEST LOG

Open Test Log to inspect diagnostic status and export:

  • SHARE CURRENT TEST LOG shares the current common log.
  • SHARE ALL SAVED TEST LOGS includes the retained logs from earlier launches.
  • Choose Save to Files in the share sheet to keep a copy.

The CSV logs include mark identifiers, camera locations, connection events, replies, and optional GPS information. Handler timings measure how quickly the app hands work off; they do not measure the exact exposure time or prove that a photo was stored.

8. TEST MARK and ordinary MARK

Use TEST MARK at the bottom of CAMERA to request photos without creating a SPOTMAP POI. Check each camera's response and playback independently.

On the main map, the initial MARK tap requests camera captures as part of the observation workflow. Selecting the POI direction/type continues independently of the camera responses. A successful mark, a Bluetooth reply, and a photo on the memory card are three separate things to verify.

⚠️Warning: A camera can disconnect, be busy, have a storage problem, or miss a request. Confirm readiness and use test playback before relying on a capture sequence.

9. Close CAMERA

Tap X to return to SPOTMAP. Closing the card leaves the camera controller available while the app is active. Connection behavior still depends on camera power, Bluetooth, and the app lifecycle; do not assume locked-screen or background capture is equivalent to foreground operation.

ABBREVIATION

  • CSV — Comma-Separated Values.
  • FOV — Field of View.
  • GPS — Global Positioning System.
  • POI — Point of Interest.
  • SD — Secure Digital memory card.
  • RAW — A camera's raw-image recording option.

DEFINITION

  • Assignment — The saved association between a camera and an aircraft location.
  • Readiness — The camera's current ability to accept the intended photo request according to available status checks.
  • Keepalive — A periodic Bluetooth exchange intended to maintain the connection.
  • TEST MARK — A camera diagnostic request that does not create a flight-session POI.
  • Playback confirmation — The user's check of the camera's stored image after a request.
  • Last-known value — A retained status reading that may no longer describe the camera's present condition.